|
|
 |
 If
you already have traffic signal we have a control module that will make it
work. If you do not already have a traffic signal or need
signal hardware and equipment for street use see our Traffic signals link
at left or visit our Trafficlights.com website.
 |
 Model
T3 - Red-Yellow-GreenThe Model T3 is our newest design to
operate a single standard 3 color traffic light head.
It will simulate a single traffic signal used on the street
today. Realistic, dynamic adjustable timing, 150W
limit (per output) means that you can convert your standard
traffic signal either Incandescent or LED into a fully functioning
unit. Quickly and easily.
 
|
|
Model T2 - Pedestrian SignalI
Convert your old WALK / DONT WALK light into a functioning
pedestrian signal. Works with Incandescent (bulbs),
fiberoptic or Newer LED types.
|
|
Model T5 - Red-Yellow-Green +
Turn arrow Green and/or Yellow
If you have 1 or 2 turn arrows and want them to cycle with
your R-Y-G signal The T5 will keep them cycling realistically.
|
 |
Model T5W - Red-Yellow-Green
plus
Pedestrian Signal (WALK/ DONT WALK) If you have a single
vehicle signal [Red - Yellow - Green ] and a single
pedestrian signal [ WALK - DONT WALK] and want them to
cycle together the T5 will keep them synchronized.
The Model T5-W combines the functionallity of the T3 with
the T2 is our newest design
to operate a single standard 3 color traffic light
head. convert
your standard traffic signal either Incandescent or LED into a
fully functioning unit.
|
|
Model
AFT3 - The Model AF/T3 is a two output alternating
flasher design to
operate rail-road crossings or school zone type flashers with a
single board.
It has adjustable speed and will continue to flash even with
one bulb out. It is a adaptation of the T3
board. Realistic, dynamic adjustable timing, 150W
limit (per output) means that you can convert your 2 light
setup, Incandescent or LED into a wig-wag, alternating
flasher unit.
|
|
Model
AF2 - HIGH POWER ALTERNATING FLASHER The Model AF2
High power Alternating Flasher Unit.
Fully encapsulated unit with 10A flashing
output. For full 10A load rating flasher
body must be attached to metal heat sink.
|
|
A4210
Single Channel Flasher unit
Fully encapsulated 1 A output
Fixed flash rate of 60 fpm (1 Hz)
Model
T3 -C140 Red-Yellow-GreenThis Model T3 is our newest design to
operate a single standard 3 color traffic light
head. It will advance between colors withthe push of
a button,
|
Credit Cards Icons:
Shipping Icons:
 
 
|
 |
|
 More Pages
You can easily add more pages and navigational buttons. To view how to do this, read the instructions file.
Extra Graphics
This template comes with many extra graphics, such as e-commerce buttons, credit card icons, shipping icons, and a replaceable static image for the movie. It also comes with the editable logo psd file.
|
|
|
 |
